It often happens that the first problems with the device Elektra Beckum DH 315 Planer appear only after a few weeks or months after its purchase. After such a long period, many people have a problem with finding documents (such as a user manual) received at the time of purchase, or maybe the documents have already been thrown out, got lost so.
Care and Maintenance
The only service required is to lubricate the thrust bearing shafts regularly through the grease nipples. This will extend
the service life considerably.
Precision Blade Guide BAS 315 /350 - Stock-no. 090 901 0900
Spare Parts Lists
Pos. Description
Stock-no.
10
Precision blade guide, small
138 813 9885
20
Blade guide seat, upper
138 040 6442
30
Blade guide seat, lower
138 040 6450
40
Grub screw M6x8 galvanized
616 106 3817
100
Carriage bolt M8x50 galvanized
611 008 0245
Spacer bush DW 8x24
644 212 6818
Pos. Description
Stock-no.
10
Precision blade guide, large
138 813 9877
20
Precision blade guide, small
138 813 9885
30
Blade guide seat, upper
138 040 6469
40
Blade guide seat, lower
138 040 6450
Bas 315
50
Grub screw M6x8 galvanized
616 106 3817
100
Carriage bolt M8x50 galvanized
611 008 0245
Spacer bush DW 8x24
644 212 6818
Precision Blade Guide BAS 450 /500 - Stock-no. 090 901 0896
7
BAS 315/450
GB
Application
Especially suitable for guiding the band saw blade where absolute precise cuts are required. The thrust bearing´s body
is hardened and precision groung, with Tungsten Carbide rims.
The advantages of the Precision Blade Guide over the Standard Blade Guide:
Elektra Beckum Bandsaw Bas 315 Manual Treadmill For Sale
- improves versatility of the machine
- extended thrust bearing service life
- no tools required for thrust bearing setting and replacing
- suitable for machines with clockwise or counter-clockwise direction of rotation
User Responsibility
This accessory is designed and intended for use on band sawing machines and will perform in conformity with the
description contained in this manual. This accessory or any of its parts should not be altered from standard
specifications. The user of this accessory shall have the sole responsibility for any malfunction which results from
improper use or unauthorized modification from standard specifications, faulty maintenance, damage or improper repair
by anyone other than qualified persons approved by ELEKTRA BECKUM or their representatives.
Important
Before installing the Precision Blade Guide, the saw band guard must be
shortened by 45 mm, so the blade can still be changed when the Precision
Blade Guide is installed.
Loosen wing nut (135) and set blade guard ass'y (12) to lowest position, until
standard roller guide ass'y rests on the table. Remove the 4 raised countersunk
head screws (212) with Philips #2 screwdriver. Use a hacksaw to cut off
45 mm from the saw band guard as indicated in the drawing below.
Reinstall saw band guard.
LINE OF CUT
Lowering the Table
Installing the Precision Blade Guide
requires lowering the band saw table.
Remove table completely from frame
and use drilling template provided to
mark position of the new holes
required. Drill four holes Ø 8.5 mm in
exact position and debur edges. With
the Precision Blade Guide installed
the maximum height of cut is reduced
by 15 mm.
Elektra Beckum Bandsaw Bas 315 Manual Treadmill
Note! The carriage bolt M8x30,
located on the underside of the table,
must be replaced by the carriage
bolt M8x50 supplied (pos. 100 or
spacer bush 8x24).
This bolt serves as stop when tilting
the table back to the 90
Elektra Beckum Bandsaw Bas 315 Manual Treadmills
°
position.
Elektra Beckum Bas 315 Blade Length
Existing holes
New holes
Drilling pattern
Bandsage Bas 315
5